"Easy Start Cam Kit for Twin Cam

Start any engine regardless of displacement or compression ratio with a stock starter

Save your starter and battery; tested for 10,000 starts without running battery down

Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance

All chain-drive cams include installation kit

All gear-drive cams include 4-gear set and installation kit

For 88/95/96/103 cubic-inch engines

Compression ratios below 10:1

Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

Due to the inherent characteristics of gear drives, you may experience more valve train noise.

Not for models with OEM compression releases.

Made in the U.S.A.

Exhaust Duration Imperial: 276°
Exhaust Open: 58,5°
Exhaust Lift Imperial: 0.635 inch
Intake Open Imperial: 19.5°
Exhaust Close: 37,5°
Intake Open: 19,5°
Exhaust Lift: 0,635 inch
Exhaust Open Imperial: 58.5°
Intake Lift Imperial: 0.635 inch
Intake Close Imperial: 43.5°
Intake Lift: 0,635 inch
Intake Duration Imperial: 243°
Intake Duration: 243°
Exhaust Close Imperial: 37.5°
Exhaust Duration: 276°
Grind: 635 Series
Model: Easy Start
Features: Includes Installation Kit
Intake Close: 43,5°
Application: Exhaust| Intake
Product Name: Cam Kit
Type: Chain
Units: Kit
"