4-speed transmission case is ratchet type.
Case accepts Torrington style 4th gear bearing and reverse gear idler shaft. Loctite recommended for mount stud installation. No Manufacturer's Statement of Origin required, Bill of Sale only. Includes 3 sets of studs installed with the following protrusions: kicker - 7/8" (22.2mm), mount - 15/16" (23.8mm) and the inner primary 15/16" (33.8mm), for kick start applications. *NOTE: Bushings are not installed. **NOTE: Technician must remove/check material for speedometer drive clearance.
Case accepts Torrington style 4th gear bearing and reverse gear idler shaft. Loctite recommended for mount stud installation. No Manufacturer's Statement of Origin required, Bill of Sale only. Includes 3 sets of studs installed with the following protrusions: kicker - 7/8" (22.2mm), mount - 15/16" (23.8mm) and the inner primary 15/16" (33.8mm), for kick start applications. *NOTE: Bushings are not installed. **NOTE: Technician must remove/check material for speedometer drive clearance.
FITS | FL 1977-1979 FX 1977-1978 |
|---|